SUPPLEMENTAL INSTRUCTIONS for JVPD 1) Locate and delete all existing JVPD files before installing the update. 2) Install the updated version of JVPD and all it's associated files. Note: Do not count on the existing files being automatically overwritten. It can not be guaranteed. In addition some files have been consolidated. This means that out of date files could be retained and inadvertently used. Delete all the old JVPD (their extension is .vdb) files before installing the new version of JVPD. For your convenience I am including a copy of the original instructions and at the end some hints on formatting and printing.

Jordan Valve Product Designator _ _ _ Please read all of the following before installing this program as there are a few quirks that could not be eliminated. · The purpose of this program is to help build a correct model number, price the item, and to produce a written quotation, while reducing the number of pricing errors and potentially invalid selections. Additionally it will ensure that adequate ordering information is available. · This program is not intended to be a substitute for product knowledge. If you do not have a thorough grounding in our products, this program will be of minimal help. · This program (JVPD) is not for general distribution. It may not be distributed freely. It is being provided to selected individuals only. · This program may contain errors, including errors in pricing. Richards Industries will honor pricing generated by this program, including those with errors, up to and including 10% of the published price as given in our current price list. · If you detect any errors please document them, so that they can be reproduced and forward the information to dcharlton@richardsind.com. Because there are a significant number of combinations it is not possible to find and correct errors without complete documentation. · Please open and run the attached file to install JVPD on your hard drive. Note that it is configured to install on your 'C' drive. If you do not have a 'C' drive this version will not install correctly.

You should carefully read the following terms and conditions before using this software. Unless you have a different license agreement signed by Richards Industries your use of this Software indicates your acceptance of this license agreement and warranty.

License for JVPD THIS SOFTWARE AND THE ACCOMPANYING FILES ARE FURNISHED "AS IS" WITHOUT WARRANTIES AS TO PERFORMANCE OR MERCHANTABILITY OR OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED. NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. This software (JVPD) is being distributed free of charge. You may not distribute copies to others. You may access JVPD through your personal computer, a network, or individual workstations. No user may alter or modify the software in any way. Nor can you give anyone else permission to make modifications to the Software. Although this program has been thoroughly checked, no warrantee as to its accuracy is made. It is the responsibility of the user to verify any and all results. The pricing information contained in this software is date sensitive and subject to change without notice. Register Your Software If you have received this software via e-mail from Jordan Valve. It will be registered automatically. Updates to this software will be sent by e-mail.

JVPD SELECTION SOFTWARE INSTRUCTIONS Set-up: After downloading the JVPD to your hard drive, go to C:\Program Files\JVPD. Open the JVPD folder. Scroll down to the file titled ruleselection (it has an icon shaped like a gear). Make a shortcut of this. Reduce the display and drag the ruleselection shortcut onto your desk top. This creates a shortcut to the program. Warning: do not open any other files in this folder. If you do, they will automatically be reformatted and from then on produce erroneous results. Operation: · Double clicking the JVPD icon will open the JVPD Selection Software page. Choose Press to Start. · In this screen, you may Open a previous quote, or start a New quote. · Choosing New will provide a list of products, designated by model number. Double click on the appropriate model number to open. · The model number should now be listed in the gray box on the Product Designator Screen. · Double-clicking on the model number (MK60) will add it to the right side of the screen where, as you build, there will be a running total of the chosen options and their prices. This will also take you to the next option, Size. · As you choose each option, you may double-click your choice (this will automatically take you to the next option), or you may single-click and use the arrows above the box to proceed. These arrows will also allow you to return to previous options in order to make changes. The computer will not permit you to skip required options. · To make changes, simply return to the specific option you wish to alter and click on the correct choice. It should now be changed on the running list. · When the last option has been chosen, choose Accept and you will be brought to the Quotation Data Entry page. This page provides the Product Designator number which you have built, the price, date, and lead time. At this time, any of these can be changed and empty fields can be filled in where necessary. If you wish to return to the previous screen to edit your quote, click Exit.. You may now use the above arrows to navigate through the options. The Quotation Data Entry page allows you to: Return to choices (Exit) Preview the quote before printing (no changes can be made in this mode) Print the quote Save the quote* Load a previously saved quote *To save the quote, click Save. To view this quote in the future, simply choose File. From the top left corner, click Open, and you will be brought to a screen where all of your quotes are listed. They can be sorted many different ways, opened, and printed from this screen. Double click on the appropriate quote and you will be brought back to the Quotation Data Entry page. Warning: do not open any other files in the JVPD folder except ruleselection. If you do they will automatically be reformatted, and produce erroneous results. Additional JVPD instructions. For those of you that want to e-mail a quote as an attachment or for some reason feel it is necessary to modify or reformat the quotation, the following may prove helpful. While not a prefect solution (the formatting may require adjustment) it does allow you to make changes. First, in the "C" drive locate an appropriate Folder (My Documents or your e-mail default) and Note the Path. 1) In the "Preview Quote" section of JVPD click on File. Then on "Export Report to File..." 2) In the window, under "Save File as Type" change the Type to ASCII. (Rich text does not work well). 3) In the upper block, name your Quote. This is done by substituting the desired name for the (*). Note: Leave the period and the letters txt. 4) In the folders box change the Path to show the folder you have selected (My Documents). 5) Press OK and when the warning about margins appears press continue. Your file will now be saved in the folder you selected. While you can open this file several ways, the best seems to be by using WordPad. In any case, you can now make whatever modifications are necessary and if you want you can e-mail the file as an attachment using you normal e-mail system. However, some e-mail seems to rearrange the formatting. So you may consider copying and pasting it into your e-mail. Note: The JVPDdownload may take several minutes