Jordan Valve is pleased to introduce the new Mark 687 Series piloted soft seat regulator. Current size availability is 1-1/2" (DN40) and 2" (DN50). End connections include: threaded (FNPT, BSPT, BSPP); ANSI Flanges (150#, 300#); and DIN Flanges - PN10/16 and PN25/40. Other end connections are available upon request. The Mark 687 Series is available in Carbon Steel or Stainless Steel.

The main valve of the Mark 687 is normally closed. The upstream pressure (P1) enters the main valve body and passes through the piping to the pilot valve. The pilot valve is normally open, allowing the upstream pressure to move through the outlet port of the pilot valve to act on the bottom of the main valve diaphragm. This force pushes the stem upward, opening the main valve. As the downstream pressure rises to the setpoint, the senses the rising pressure and begins to close. This throttles the flow to the main diaphragm. The pressure on the main valve diaphragm is bled off downstream and the main valve closes. In this way, the Mark 687 modulates between open and closed to maintain control.

For further information please contact your local representative or call 1-800-543-7311.