Product Directory - Sliding Gate Regulators
| Mark 60/601/602/61 Series Self-Operated Pressure Regulators The Mark 60 is a line of self-operating pressure regulators designed with Jordan Valve's sliding gate seats. The Mark 601/602 meet higher capacity requirements than standard regulators. The Mark 61 features a larger diaphragm than a standard MK60 to provide even greater sensitivity and minimal offset from a required setpoint. |
| Mark 62 Series Internally Piloted Pressure Regulators A specialty valve designed for critical application regulation in locations where space is limited. The Mark 62 valve provides the accuracy of a piloted valve with the size, weight and appearance of a single, self-operated valve. |
| Mark 63/64 Series Differential Pressure Regulators Designed to maintain a constant differential between the pressure on the discharge side of the regulator and the single pressure loaded on the diaphragm. The Mark 64 provides the same flow capacity as the Mark 63 but with less offset in controlled pressure due to a larger diaphragm. |
| Mark 65 Series Vacuum Regulators Control very accurately and shutoff tightly to maintain the proper vacuum setting. |
| Mark 66 Series Air Loaded Pressure Regulators A highly accurate and economical air loaded pressure regulator that provides regulation from a local station or from a remote station. |
| Mark 67 Series Pilot-Operated Pressure Regulators For critical pressure reducing applications and provides greater accuracy and lower offset than can be achieved with a self-operated regulator. |
| Mark 50/501/502/51 Series Self-Operated Back Pressure Regulators The Mark 50 is used to regulate upstream pressure at a predetermined setpoint. The Mark 501/502 meet higher capacity requirements than standard back pressure regulators. The Mark 51 features a larger diaphragm than the standard MK50 to provide even greater sensitivity and more accurate regulation of your required setpoint. |
| Mark 52 Series Back Pressure Internally Piloted Pressure Regulators A specialty valve designed for critical application regulation in locations where space is limited. The Mark 52 valve provides the accuracy of a piloted valve with the size, weight, and appearance of a single-self-operated valve. |
| Mark 53/54 Series Differential Back Pressure Regulators The Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on the top of the diaphragm. The Mark 54 provides the same flow capacity as the Mark 53 but with less offset in controlled pressure due to a larger diaphragm. |
| Mark 55 Series Vacuum Regulators Control very accurately and shutoff tightly to maintain the proper vacuum setting. |
| Mark 56 Series Air Loaded Back Pressure Regulators A highly accurate and economical air loaded back pressure regulator that provides regulation from a local station or from a remote station. |
| Mark 57 Series Externally Piloted Back Pressure Regulators Designed to accurately control pressure to 100% of its rated flow capacity with only a small deviation from setpoint. |
