HVAC Systems
Mark 50 Series ⟶
Self Operated, Sliding Gate, 1/4"- 4", Up to 200 Cv | Quick Ship Available
Mark 501/502 Series High Flow Back Pressure Regulator ⟶
Sliding Gate, Cv (Kv): up to 70 (up to 60), Sizes: 1-1/2″ – 2″ (DN40 – DN50)
Mark 50HP Series High Pressure Back Pressure Regulator ⟶
Up to 450 psi (31 bar), 1/4" - 4" (DN8 - DN100) | Quick Ship Available
Mark 51 Series High Temperature Back Pressure Regulator ⟶
Large diaphragm, 1/4" - 3/4" size range
Mark 52 Series Pilot Operated Back Pressure Regulator ⟶
Internally Piloted, Lightweight Design, Sizes: 1/2" through 2" (DN15 to DN50)
Mark 53/54 Series Differential Back Pressure Regulator ⟶
Differential, Jorlon Diaphragm, Sizes: MK53: 1/4″ – 2″ (DN8 – DN50); MK54: 1/4″ – 3/4″ (DN8 – DN20)
Mark 55 Series Vacuum Back Pressure Regulator ⟶
Upstream Vacuum, Jorlon Diaphragm, Sizes: 1/4″ – 2″ (DN8 – DN50)
Mark 56/560 Series Air Loaded Back Pressure Regulator ⟶
Dome Loaded, High Accuracy, Sizes: 1/2″ – 6″ (DN15 – DN150)
Mark 57 Series Pilot Operated Back Pressure Regulator ⟶
Externally Piloted, Superior Accuracy, Sizes: 1/2″ – 6″ (DN15 – DN150)
Mark 575 Series Self Operated Back Pressure Regulator ⟶
Wafer Style, Jorlon Diaphragm, Sizes: 3″ – 6″ (DN80 – DN150)
Mark 58FT/A Series Cage Trim Back Pressure Regulator ⟶
Cage Trim, Dual Inlet & Outlet for Through-Flow, Sizes: 1/4″ through 2″ (DN8 through DN50)
Mark 58G Series Globe Style Back Pressure Regulator ⟶
Tight Shutoff, Sizes: 1/4″ through 2″ (DN8 through DN50), Cv (Kv): up to 20 (up to 17,3)
Mark 586FT/586A Series Dome Loaded Back Pressure Regulator ⟶
Cage Trim, Sizes: 1/4″ - 2″ (DN8 – DN50), Max. Inlet Pressure: 300 psi (20,7 bar)
Mark 60 Series ⟶
Self-Operated Sliding Gate Pressure Reducing Regulator | Quick Ship Available
Mark 68G Series Globe Type Pressure Reducing Valve ⟶
High Capacity, Exceptional Accuracy, Sizes: 1/4″ - 2″ (DN8 - DN50) | Quick Ship Available
Mark 608 Series ⟶
Direct Operated Tank Padding Regulator or
Gas Pressure Reducing Regulator for Low Pressures
1-1/2" - 2" (DN40 - DN50)
Mark 608BP Series ⟶
Direct Operated Tank Padding Regulator or
Gas Pressure Reducing Regulator for Low Pressures
3/4" - 1" (DN20 - DN25); Balanced Plug - Good for High Inlet Pressures
Mark 608IS Series ⟶
Direct Operated Tank Padding Regulator or
Gas Pressure Reducing Regulator for Low Pressure
3/4" - 1-1/4" (DN20 - DN32); Internal Sensing - Good for Low Inlet Pressure
Mark 627 Series Spring Loaded Pressure Regulator ⟶
Self-Operated, High Inlet Pressure; Sizes: 3/4″ - 2″ (DN20 - DN50)
Mark 630 Series Gas Pressure Reducing Regulator ⟶
Self-Operated, High Inlet Pressure up to 1500 PSI, Sizes: 1″ & 2″ (DN25 & DN50)
Mark 70 Series ⟶
Sliding Gate Diaphragm Control Valve
Mark 701/702 Series ⟶
Sliding Gate Control Valve for High Flow, Higher Cv's (Kv's)
Mark 78 Series Series Pneumatic Control Valve ⟶
Globe Style, Accurate Performance, Size: 1/2″ - 2″ (DN15 - DN50) | Quick Ship Available
Mark 75 Series ⟶
Wafer Style, Motor Operated, Very Precise
Mark 75HW Series ⟶
Wafer Style, Hand Operated, Precise Adjustment
Mark 75MV Series ⟶
Wafer Style, Motor Operated Control Valve; Sliding Gate; 1″ - 8″ (DN25 - DN200)
Mark 75PTP Series ⟶
Piston Operated with Smart Positioner
Mark 33 Series ⟶
Boiler Feedwater Control Valve; Motor Operated Sliding Gate; 1/4″ – 2″ (DN8 – DN50)
Mark 37 Series ⟶
Motor Operated Control Valve With Electronic Linear Actuator; 1/4″ – 6″ (DN8 – DN150)
Mark 39 Series ⟶
Motor Operated Three Way
Mark DBAQ Series Angle Style Control Valve ⟶
High Pressure, High Temperature, Size: 2″
Mark CFR Series Pressure Reducing Filter Regulators ⟶
Filter Regulators
Mark D & DA Series ⟶
Globe & Angle Control Valve
Mark ED & ET Series (1″ – 6″) ⟶
Globe Style Control Valve
Mark ED & ET Series Globe Style Control Valve ⟶
Top Entry Cage Design, Tight Shutoff, Sizes: 8"
Mark EW Series ⟶
Globe Style Control Valves
Mark EZ Series ⟶
Globe Style Control Valve
Mark 695 Series (3/4″ – 1″) ⟶
Piloted Tank Padding Regulator
3/4", 1" (DN20, DN25); External Pilot
Mark 695X Series ⟶
Direct Operated Tank Padding Regulator
1/2" - 3/4" (DN15 - DN20)
Mark 608BPM Series Direct Operated Pressure Reducing Valve ⟶
Spring Loaded, Self Actuated, Sizes: 1" up to 10" (DN25 - DN250)
Mark 608MM Series Spring Loaded Pressure Regulator ⟶
Flow to Open Design, Sizes: 1" through 10" (DN25 through DN250)
Mark 608UBAN Series Direct Operated Pressure Reducing Valve ⟶
High Capacity, Spring Loaded, Sizes: 1/2" to 2" (DN15 to DN50)
Y-Type Strainers ⟶
Line Strainers, For Services up to 1480 psi
Your List
Email List
Get A Quote
HVAC systems require reliable control of pressure, flow, and temperature to maintain efficient and consistent operation.
Jordan Valve offers a range of control valves and pressure regulators for heating, cooling, and industrial HVAC applications.
HVAC Control Valves & Pressure Regulators
Jordan Valve provides HVAC pressure regulators, pneumatic control valves, and temperature control valves for different system requirements. These solutions help regulate fluid and steam flow, maintain operating pressure, and support accurate temperature control.
Our range includes self-operated, pneumatic, motor-operated, and temperature regulating valves for HVAC and process heating and cooling applications.
Whether you need an HVAC temperature valve, pressure regulator, or pneumatic control valve for HVAC systems, our Engineering and Sales team can help you select the right solution.
Need Help With Your HVAC Application? Contact Us!